6-2
DuraLAN Fast Ethernet NICs User’s Guide
Selecting Options
This section provides the option you must select in a given screen.
These screens vary depending on which NetWare Client32 package
you are using.
Editing startnet.bat
To assign multiple ports, follow these steps:
1
Load
c:\novell\client32\adptsf.lan
.
2
In
startnet.bat
, type
slot=[port slot number]
at the end of
each line. The following example shows the setting assigned to
port 1:
iomap=1 frame=ETHERNET_802.2 slot=1
3
For the next port, type
iomap=1 frame=[frame type] slot=[port slot
number]
To assign multiple frame types, repeat this step, changing the
frame type setting.
4
Repeat Step 3 for each additional port.
Screen Name/Message
Option
Client Installation
Select either NetWare Client32 for DOS and
Windows 3.1x
or IntraNetWare DOS/
Windows for DOS/Windows
.
Driver Type
Select 32-Bit.
32-Bit Network Board
Drivers
Select User Specified 32 Bit Driver. Do not
choose Adaptec PCI Ethernet Driver Failover.
When asked to insert
the NetWare Client32
for DOS/Windows
3.1x 32-bit CD
Insert the Duralink64 driver for NetWare
(CD), and type
a:\nwserver
.
32-Bit Network Board
Drivers
Select Adaptec DuraLAN Network Adapters.
Settings for Adaptec
DuraLAN Network
Adapter
Set IOMAP to 1. Set Connection Type to
Autodetect Default
or None.
