7-3
Duralink64 Standalone Driver for UnixWare
15
Repeat Steps 8 through 14 for additional LAN configurations.
16
To exit, click Hardware, then select Exit.
Assigning the Protocols
To assign IP or IPX protocols to standalone ports, follow these
steps:
Note:
The IPX protocol supports all four frame types and
multiple-frame types simultaneously. IP protocol supports
either Ethernet_II or Ethernet_SNAP, but not both at the
same time. Adding IPX/SPX requires a system reboot.
1
Select Add Protocol from the Network Configuration Manager
menu.
2
From the Protocol menu, select IPX/SPX or TCP/IP.
3
Click Add.
4
Enter the network configuration, and click OK. Repeat Steps 1
through 3 for each additional protocol.
Viewing the Configuration
It is important to verify the current port configurations before
saving them to the server.
To verify the current port configurations, follow these steps:
1
Select the Protocol option from the Network Configuration
Manager menu, and press Enter.
2
Select View Protocol Configuration.
3
If the setup is correct, click OK.
4
To exit, click Hardware, then select Exit.
