3-11
Duralink64 Driver Installation for Windows
4
Double-click Network adapters.
5
Select the Adaptec DuraLAN NIC that you wish to remove.
6
Right-click and select Uninstall.
7
Click OK; the driver will be uninstalled.
Windows NT 4.0
To remove the previously installed DuraLAN driver from a
Windows NT 4.0 platform, follow these steps:
1
Double-click My Computer.
2
Double-click Control Panel.
3
Double-click Network.
4
In the Network window, click the Adapters tab.
5
In the Network Adapters list, click the Adaptec DuraLAN NIC
you want to remove, and click Remove.
6
When asked if you wish to continue, click Yes.
7
Repeat Step 5 until all Adaptec DuraLAN drivers are removed.
8
When you are done, click Close.
9
Click Close to close the Network window.
10
Click Yes to restart your computer.
Note:
When you restart Windows NT, a message may
indicate that at least one service failed to start. This
message will not appear after you add the new driver.
Click OK.
Windows 98/Me
To remove the previously installed DuraLAN driver from the
Windows 98/Me platform, follow these steps:
1
From the Start menu, point to Settings, and click Control
Panel
.
2
In the Control Panel, double-click System.
