4-4
DuraLAN Fast Ethernet NICs User’s Guide
4
Select the speed for the connection. The default selection is
Autodetect.
Note:
We recommend that you leave all property value as
default value unless the modification is really necessary.
Autodetect will automatically select the appropriate speed
for the Adaptec DuraLAN NIC you have installed.
5
Repeat Steps 3 and 4 for other existing ports as required.
6
Click OK.
Configuring the Ports in Windows NT 4.0
In the Adaptec New Hardware Found window, each port is
assigned to Autodetect, the default connection type that will always
detect port connection and negotiate a compatible speed and
transmission mode.
To configure the Standalone driver ports in Windows NT 4.0 and
select the connection type for your Adaptec DuraLAN NIC, follow
these steps:
Note:
If you are required to insert the Windows NT CD,
you must reinstall the latest version of the Microsoft
Windows NT Service Pack, then restart the system.
1
In the Adaptec New Hardware Found window, make sure all
the DuraLAN NIC ports appear.
