5-15
Duralink64 Drivers for NetWare
Modifying Driver Configurations
Once Duralink64 Standalone, Failover, Port Aggregation, or FEC is
installed, use
configsf
to add, remove, or change a driver
configuration for an Adaptec DuraLAN NIC.
To modify driver configurations, follow these steps:
1
At the system console prompt, type
load configsf
, and
press Enter.
2
Once you have opened
configsf
, refer to
Configuring the Ports
on page 5-7
for more instructions.
Removing or Uninstalling Drivers
If a new driver must be installed to replace an existing driver,
follow these steps:
1
At the system prompt, type
load configsf
, and press
Enter
.
2
At the Main Menu, select Uninstall Software, and press Enter.
3
Select Yes. The computer will begin to remove files.
4
Select Exit.
5
On the Save Configuration box, select Quit Without Saving.
6
At the system prompt, type
restart server
, and press
Enter
.
