4-25
Duralink64 Configurations for Windows
Understanding the Status Tab in Windows 2000/XP
Field Descriptions
a
Model
Adaptec DuraLAN NIC model number.
b
Port Name
Local area connection assigned by the system.
c
Trans Kbps
Total kilobits per second (Kilobits/sec) transmitted per port
(standalone and group). The Kilobits/sec sum of aggregated
ports in a group equals the total Kilobits/sec transmitted by
their group.
d
Load
The percentage of transmit load carried by each port in a
group. The percentage of a standalone port is always 100%.
The percentage for a group is calculated as a percentage of
bytes transmitted by the port over bytes transmitted by the
group during the last screen refresh interval.
e
Status
If the link is up and has transmitted data within the last screen
refresh interval, ACTIVE is displayed. If the link is up but the
port has not transmitted any data within the time interval,
IDLE is displayed. If the link is down, DOWN is displayed.
f
Speed
Speed is either 10 or 100 in half or full duplex mode. This
value depends on the connection type you chose in
Configuring the Ports in Windows 2000/XP on page 4-11
.
g
Primary Port
This is the primary port assigned to the group. All TCP/IP
settings will be taken from this port.
h
Group
Transmit Total
This field appears only when a group is selected in Port
Aggregation mode.
a
b
c
d
e
f
g
h
