Adam Equipment GK страница 16 Скачать руководство пользователя

Страница: 16 / 66

14 © Adam Equipment Company 2011

BATTERY

•

The indicators can be operated from the rechargeable battery, if

desired. The battery life is determined by the number and impendence

of the load cells connected. With a single load cell and backlight

disabled the life is approximately 70 hours before needing to be

recharged.

•

When the battery needs charging a symbol on the display will turn on.

The battery should be charged when the symbol is on. The indicator will

still operate for a period of time after which it will automatically switch

off to protect the battery.

•

To charge the battery, simply plug into the mains power supply. The

indicator does not need to be turned on.

•

The battery should be charged for 12 hours for full capacity.

•

To the right of the display is a LED to indicate the status of battery

charging. When the indicator is plugged into the mains power the

internal battery will be charged. If the LED is green the battery is being

charged. If it is red it is nearly discharged and yellow indicates the

battery is increasing the charge level. Continue to charge overnight for

a complete re-charge.

BACKLIGHT

The backlight for the LCD can be set by the user to always off, always on or
automatic (on only when the indicator is in use or a key is pressed). See setting of
the parameter

“S2 bL”

in section 13.3.

10.

AUTO POWER OFF

The auto power off can be set by the user to disable the feature or to a pre-set time
interval. See setting of the parameter

“S3 AoF “

in section 13.3.

Содержание GK



































































Результаты поиска

Содержание GK

Отзывы:

Похожие инструкции для GK

Бренды по названию

Популярные бренды

Adam Equipment GK, Руководство пользователя

Результаты поиска

Содержание GK

Отзывы:

Похожие инструкции для GK

Бренды по названию

Популярные бренды