Adam Equipment GK страница 30 Скачать руководство пользователя

Страница: 30 / 66

28 © Adam Equipment Company 2011

11.8.1

NIMAL WEIGHING PROCEDURE

•

With the platform empty the display will show zero weight.. Place containers

or blankets onto the platform and press the

[Tare]

key to zero the display.

The indicator may go into the animal weighing procedure when the items are

placed on the platform but will return to showing zero when the

[Tare]

key is

•

Place the animal to be weighed on the platform.

•

When a stable reading is found, the display will show this value, and the

display will be locked until the [Unit] key is pressed. The display will show the

“Hold” symbol while the display is locked. Remove the animal, the display will

hold the weight value.

•

Press the

[Unit]

key to unlock the display. The display will flash “

Ani

” twice,

and be ready for the next animal.

•

To weigh a second animal press the

[Tare]

key if necessary to zero the display,

and place the next animal on the platform. It is also possible to simply place

the next animal on the scale without clearing the last value first. The indicator

will detect the new weight and hold it as before.

•

The indicator will remain in the animal weighing mode until the

[Zero]

key is

pressed. Then it will return to normal weighing.

Содержание GK



































































Результаты поиска

Содержание GK

Отзывы:

Похожие инструкции для GK

Бренды по названию

Популярные бренды

Adam Equipment GK, Руководство пользователя

Результаты поиска

Содержание GK

Отзывы:

Похожие инструкции для GK

Бренды по названию

Популярные бренды