Ada Platinum Elite, Руководство по установке

Страница: 40 / 48

SYSTEM SET UP
26. Reset Default
This will remove all user/installer
saved information and return the
system to its original factory
settings.
Tapping will reset the
system, then return to the Zone
Setup screen presented during an
initial set up.
NOTE: It is possible to do a factory
reset of the Tablet by using a small
pin or paperclip to press the
factory reset button accessible
through the small hole on the
bottom of the Tablet. This will
return the tablet to its original
factory settings.
'Yes, reset'
SYSTEM SET UP
INSTALLATION MANUAL 38 39
25. Adding an AC
If upgrading a system to add a
Platinum Elite Gateway to enable
AC control, or
Follow the process
described in Section 18.
if the Gateway is
added after the initial setup
process, on the Zone Setup screen
it will be necessary to perform a
‘Recheck’ to allow the Gateway to
be detected.
NOTE: Ensure no Zones or
Temperature Sensors are in fault
when a ‘Recheck’ is activated as
these Zones or Temperature
Sensors will be removed from the
system.
Once the AC Gateway is detected,
you will be prompted to
‘Configure AC’.