Ada Platinum Elite, Руководство по установке

Страница: 30 / 48

When the Zone setup is complete,
tap .
If no Relief Zones have been set a
warning screen will display.
Tapping
will take user to
a room selection screen so Relief
Zones can be set. Tapping
confirms acceptance no Relief
Zones are set.
NOTE: If no Relief Zones have
been set there must be a Zone
where no Damper is fitted to
allow for the minimum airflow
requirement and prevent any
damage to the air conditioning
system.
‘Complete Setup’
When using a Platinum Elite
Gateway, the Zone Setup screen
will show ‘Continue Setup’. The
system should automatically
detect the brand Gateway and
prompt the AC setup screen. Use
the AC setup screen to give the AC
a name and configure AC settings.
'Set now'
'OK'
18. Setting AC control
SYSTEM SETUP SYSTEM SET UP
INSTALLATION MANUAL 28 29
Deselect unsupported AC modes
for the installed AC system.
For Advanced Installations (refer
AC brand Commissioning Notes),
if using external reference
sensors, tap on ‘AC’ icon to select
an alternate Reference
Temperature Sensor. Depending
on the installation configuration,
this could be the ‘Tablet’ or one of
the connected room Temperature
Sensors.
Set available Fan speed options as
required. Once AC setup is
complete, tap ‘Save’ to exit screen
and continue.