Prestige 42 - 50 - 75 Solo
Prestige 100 - 120 Solo
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
12
1
2
3
17
6
7
4
10
9
8
11
5
13
14
15
16
PRESTIGE 42-50-75-100-120 Solo : A1007856 - 664Y6200 • G
EN
FR
NL
ES
IT
DE
PL
RU
en
15
APPLIANCE DESCRIPTION
APPLIANCE DESCRIPTION
MODELS - PRESTIGE 42 - 50 - 75 - 100 - 120 SOLO
The Prestige is a wall-hung condensing boiler meeting the requirements of current “HR-Top” standards
in Belgium. The boiler is certified compliant with “EC” standards as a connected appliance: C13(x) -
C33(x) - C43(x) - C53(x) - C63(x) - C83(x) - C93(x), but it can also be connected as an open appliance in
category B23 or as an appliance of category B23P, which can operate with a positive pressure.
The boiler features a built-in frost protection mechanism: as soon as the flow temperature [NTC1
probe] drops below 7°C, the central heating pumps are activated. As soon as the flow temperature is
at 5°C, the burner starts up until the flow temperature rises above 15°C. The pumps continue to run
for around 10 minutes. The function can be enabled or disabled through the installer menu. When
the frost protection is disabled, only the pumps operate.
An anti-freeze function is also available if an outdoor temperature sensor is connected, the pumps
are activated when the outside temperature drops below the threshold defined through the Freeze
protection function in the installer menu. In order to enable the Prestige boiler to protect the whole
system against freezing, all the valves of the radiators and the convectors should be completely open.
1. Concentric chimney connection 100
/150mm with measuring element
2. Chimney tube
3. Modulating Air/gas premix burner
4. Gas pressure switch
5. Air inlet
6. Condensate recovery dish
7. Heating return
8. Safety valve
9. Control panel with display and pressure
gauge
10. Pressure sensor
11. Electrical panel.
12. Stainless steel heat exchanger
13. Heating supply
14. Auto air vent
15. Flame sight glass
16. Insulated casing
17. Gas valve
