PRESTIGE 42-50-75-100-120 Solo : A1007856 - 664Y6200 • G
EN
FR
NL
ES
IT
DE
PL
RU
en
37
CONFIGURATION AND SYSTEM SET-UP
CH setting,
with no outdoor sensor
installed
Heating EZ Setup
Select CH Demand
Thermostat & Setpoint
Constant & Setpoint
0 - 10 V Modulation Signal
This menu is available when no
optional outdoor temperature
sensor is installed. Refer to the
menu information and steps in
“Boiler Setup Guide” on page
8.
CH setting,
with an outdoor sensor
installed
Heating EZ Setup
Select CH Demand
Thermostat & Outd. Curve
Constant & Outdoor Curve
Constant & Setpoint
0 - 10 V Modulation Signal
This menu is available when an
optional outdoor temperature
sensor is installed. Refer to the
menu information and steps in
“Boiler Setup Guide” on page
8.
DHW settings, when no optional water heater sensor is installed with the DHW tank
DHW EZ Setup
Select DHW Demand
Thermostat
Sensor
Select
Thermostat
when no
optional water heater sensor
is installed. Refer to the menu
information and steps in “Boiler
Setup Guide” on page 8.
DHW setting, when an optional water heater sensor is installed with the DHW tank
DHW EZ Setup
Select DHW Demand
Thermostat
Sensor
Select
Sensor
when an optional
water heater sensor is installed.
Refer to the menu informa-
tion and steps in “Boiler Setup
Guide” on page 8.
Enabling the CH / DHW circuit
CH / DHW Operation
Heating enabled
DHW enabled
SETTINGS FOR THE BASIC CONFIGURATION, USING THE EZ SETUP OF
THE USER INTERFACE
To set the system up for the configuration described on previous page, access the EZ setup menu
pages below, as indicated in “Boiler Setup Guide” on page 8.