4
4. Waterproof switch (HB-1)
Connected to 1 and COM connecting terminals
of the two-core bus of the mainframe
5. Transfusion alarm device (HA-1)
Able to cooperate with HI-1/2 extension or operate independently (an
additional power supply is required).
Clamped onto the transfusion tube, it has not contact with transfusion. Simple
one-key operation.
Beep will emit when transfusion is completed; at the same time, the transfusion
tube will be automatically blocked.
When it cooperates with the HI-1/2 extension, alarm signals can be sent to the
mainframe of the nurse station through the extension. There is LED display on the
mainframe, and the voice announcement 'XX transfusion completed' will be played.
Working voltage: DC12V
Maximum working current: 450mA
Dimensions:
60x70x65mm(LxWxH)
Connected to the transfusion alarm interface of the extension
Corridor displays include dot matrix single-sided display, dual-side corridor display HD-1/HD-2, dot matrix
single-side, and dual-side corridor display HD-3/HD-4.
Simple installation, only one three-core wire is required for direct connection with the mainframe for convenient
check.
Generally, it is installed in the corridor to facilitate nursing personnel in the corridor in observing.
The dot matrix display can display the calling extension number and nursing grade, in case of no call, it is able to
display year, month, date, time, 'Please keep quiet!' or etiquette phrases.
Independent power supply shall be provided.
Working voltage:DC11-18V
Dimensions:(Single-side and small)478X140X35mm(LxWxH), (Dual-side and big)1048X140X35mm(LxWxH)
(Single-side and small)478X140X70mm(LxWxH), (Dual-side and big)1048X140X70mm(LxWxH)
2
1
Installation support
Connecting wire(A, B, +12V/14V, COM)
Dot matrix display area
3
3
6. Corridor displays (HD-1, HD-2, HD-3, HD-4)
Dot matrix displays (HD-1, HD-2)
1
3 2
A, B, +12V, COM wire
1
3
Dot matrix displays (HD-3, HD-4)
A, B, +12V, COM wire
1
2
1
3
It is generally installed in the toilet of the ward for alarm when there is an
emergency of patients in the toilet.
Two alarm modes are available, namely, pulling cord and pressing key.
Water balls and fog in the toilet shall be prevented, so as to ensure the normal
use of the switch.
In case of emergency alarm in the toilet, there will be voice prompt and number
display on the mainframe.
When the switch is in the alarm status, the indicator light on the switch will blink,
if the indicator light goes out, it means that the nurse station has received the
alarm signal.
Dimensions:86x86x15mm(LxWxH)
