Acutron HC-30 Скачать руководство пользователя страница 16

Страница: 16 / 19

The routing switches of 1-12 on the mainframe respectively represent key 1, key 2, key 3, key 4, key 5, key 6, key 7,
key 8, key 9, key 0, deletion key and ok key.
Enter the setup mode according to the above-mentioned method. First select the extension number to be set on the
mainframe in order (namely, first select the extension routing switches of channels 1 and 3), then select the room
number to be set (namely, then select the extension routing switches of channels 2, 10 and 4), at last, select the bed
number to be set (namely, select the extension routing switches of channels 10 and 3). After confirmation, select the
extension routing switch of channel 12 (namely, the OK key), confirm the setup, and proceed to the next extension
setup; to modify the extension being set up of the channel, select the extension routing switch of channel 11 (namely,
the Delete key) to delete the extension being set up. After all extensions are set up, press the Function key to exit
from the setup.

Four management levels are available for the system setup. If there is no multi-level management, the user is not
required to set the item, instead, it can be used directly. In case of multi-level management, the duration of the
extension calling the low priority mainframe (no response from the mainframe) can be set up, and then transmit
upward to the higher level of the mainframe.
(Optional forwarding upward durations. 10s, 30s, 60s, 120s, and 240s)

12. Forwarding upward duration setup (take 30s for an example)

030

Model:HC

Transfer Time

010

Model:HC

After the previous item, press the Function key

to enter the forwarding upward duration setup.

Tier Transfer

Setup

FUNCTION

MNTR

ALL

Model:HC

PWR

11. Online coding setup (e.g., code the extension as No. 1 extension)

After the previous item, press the Function

key to enter online coding setup

Press the or key to enter setup

Code all extensions according to the above-mentioned method.

A. After all extension are coded, it is suggested that users press the Function key to exit from the setup, and press
down the Call key of each line of extension to confirm that all extensions are coded.
B. In case of coding, press down the extension's Call key until the extension indicator light blinks, release the Call key,
about ten seconds later, if the corresponding routing switch on the mainframe is not timely chosen, or the routing
switch of the mainframe is pressed down for a long time, and the extension call indicator light turns red and blinks,
it means that the channel's coding function has been cancelled. To code once more, press the Call key once more,
until the extension call indicator light blinks, and the method is the same as the above.

Note

Press the extension's Call key until the extension's Call indicator
light blinks, and then release the Call key

Select the first channel of the routing extension switch on the mainframe, the extension
call indicator light turns red and blinks, which means that No. 1 extension has been set.

Encode address

Model:HC

Setup

061