ActronAir LC7, Руководство по эксплуатации

Страница: 32 / 40

Page 32
Operation Manual
LC7 Wall Controller
3. Press the “ SELECT or ” Button to navigate to Program Menu 06.
Set the requird fan speed you wished yo lock.
Press “ Select

or

“ button to scroll trough and
select Program Menu 07, Fan Speed Lock.
Press "
Program " button to enter the menu.
Press “ Select  or  “ button to turn the Mode
lock ON.
Press "
PROGRAM " to accept the selection.
NOTE: Mode lock is OFF by default.
Set the Setpoint based on the desired target
temperature.
Press “ PROGRAM “ button to enter program
Menu .
Press “
Select  or 
“ button to scroll trough and
select Program Menu 06, Set temp Lock.
Press "
Program " button to enter the menu.
4. Press the “
PROGRAM
“ Button to enter Program Menu 06.
Set the requird fan speed you wished yo lock.
Press “ Select

or

“ button to scroll trough and
select Program Menu 07, Fan Speed Lock.
Press "
Program " button to enter the menu.
Press “ Select  or  “ button to turn the Mode
lock ON.
Press "
PROGRAM " to accept the selection.
NOTE: Mode lock is OFF by default.
NOTE
Fan speed lock is OFF by default.
5. Press the “ SELECT or ” Button to turn the fan lock “ ON ”.
Set the requird fan speed you wished yo lock.
Press “ Select

or

“ button to scroll trough and
select Program Menu 07, Fan Speed Lock.
Press "
Program " button to enter the menu.
Press “
Select  or 
“ button to turn the Mode
lock ON.
Press "
PROGRAM
" to accept the selection.
NOTE: Mode lock is OFF by default.
6. Press the “ PROGRAM ” Button to accept the selection.
7. Press the “
EXIT
” Button once to go back to the main Screen
Press “ Select

or

“ button to turn the Set temp
lock ON.
Press "
PROGRAM " to accept the selection.
NOTE: Set temp lock is OFF by default.
Press " EXIT " twice to go back to main Screen
When " Set Point ˄ or ˅" button is pressed. The
"Lock" symbol will appear for 3 seconds and user
won't be able to change set temp.
8. When the “
FAN
” Button is pressed, the “
Lock
” symbol will appear for 3 seconds and user won’t be able to
change fan speed.
Press “
Select  or 
“ button to turn the Set temp
lock ON.
Press "
PROGRAM
" to accept the selection.
NOTE: Set temp lock is OFF by default.
Press " EXIT " twice to go back to main Screen
When " Set Point ˄ or ˅" button is pressed. The
"Lock" symbol will appear for 3 seconds and user
won't be able to change set temp.
NOTE
To disable Fan Speed Lock, follow same steps above. However, in step 5 select “ OFF ”.