ActronAir LC7, Руководство по эксплуатации

Страница: 24 / 40

Page 24
Operation Manual
LC7 Wall Controller
14.03. Temperature Set Back
Normally, the air conditioning system is turned off at unoccupied times or at night, which can result in the building
temperature becoming quite hot (e.g. 30
o
C) or quite cold (e.g. 12
o
C). When you Turn-ON the air conditioning system, it
can take a long time to achieve a comfortable temperature (e.g. 23
o
C). The temperature set back feature will maintain the
building temperature at a pre-determined and reasonable temperature closer to your chosen set temperature (e.g. 23
o
C),
thus giving you a big head start in achieving your comfortable temperature.
The air conditioning system must be Turned-OFF before performing these procedures.
14.03.01. Activating the Temperature Set back
NOTE
Activating Temperature Set back may cause unit to operate even if the LC7 Wall controller is “ OFF ”. Please
proceed with activating the Temperature Set back feature if you understand the purpose and operating
parameters. For further enquires, please contact ActronAir Technical Support on 1800 119 229.
1. Press the “ PROGRAM ” Button to enter program Menu
To enable setback
Press “ PROGRAM “ button to enter program
Menu .
Press “ Select

or

“ button to scroll trough and
select Program Menu 03.
Press “ PROGRAM “ button to enter
Program Menu 03.
Display will show set back display.
"OFF" field is blinking.
Press “ Select

or

“ button to toggle from
"OFF" to "ON".
Press "
PROGRAM " to confirm the selection.
2. Press the “ SELECT or ” Button to navigate to Program Menu 03 .
To enable setback
Press “
PROGRAM
“ button to enter program
Menu .
Press “ Select

or

“ button to scroll trough and
select Program Menu 03.
Press “ PROGRAM “ button to enter
Program Menu 03.
Display will show set back display.
"OFF" field is blinking.
Press “ Select

or

“ button to toggle from
"OFF" to "ON".
Press "
PROGRAM " to confirm the selection.
3. Press the “ PROGRAM “ Button to enter Program Menu 03.
Display will show “ SET BACK ” indicator and “ OFF ” field is blinking.
To enable setback
Press “
PROGRAM
“ button to enter program
Menu .
Press “ Select

or

“ button to scroll trough and
select Program Menu 03.
Press “ PROGRAM “ button to enter
Program Menu 03.
Display will show set back display.
"OFF" field is blinking.
Press “ Select  or  “ button to toggle from
"OFF" to "ON".
Press "
PROGRAM " to confirm the selection.
4. Press the “ SELECT or ” Button to scroll from “ OFF ” to “ ON ”.
To enable setback
Press “ PROGRAM “ button to enter program
Menu .
Press “ Select

or

“ button to scroll trough and
select Program Menu 03.
Press “ PROGRAM “ button to enter
Program Menu 03.
Display will show set back display.
"OFF" field is blinking.
Press “ Select

or

“ button to toggle from
"OFF" to "ON".
Press "
PROGRAM " to confirm the selection.