ActronAir LC7, Руководство по эксплуатации

Страница: 31 / 40

Page 31
Operation Manual
LC7 Wall Controller
6. Press the “ PROGRAM ” Button to accept the selection.
7. Press the “ EXIT ” Button once to go back to main Screen
Press “ Select  or  “ button to turn the Set temp
lock ON.
Press "
PROGRAM " to accept the selection.
NOTE: Set temp lock is OFF by default.
Press " EXIT " twice to go back to main Screen
When " Set Point ˄ or ˅" button is pressed. The
"Lock" symbol will appear for 3 seconds and user
won't be able to change set temp.
8. When the “ SET TEMP ” or ” Button is pressed. The “ Lock ” symbol will appear for 3 seconds and user
won’t be able to change set temp.
Press “ Select

or

“ button to turn the Set temp
lock ON.
Press "
PROGRAM " to accept the selection.
NOTE: Set temp lock is OFF by default.
Press " EXIT " twice to go back to main Screen
When " Set Point ˄ or ˅" button is pressed. The
"Lock" symbol will appear for 3 seconds and user
won't be able to change set temp.
NOTE
To disable Setpoint Lock, follow same steps above. However, in step 5 select “ OFF ”.
14.06. Fan Speed Lock
14.06.01. Activating Fan Speed Lock
1. Set the required fan speed you wish to lock.
Set the Setpoint based on the desired target
temperature.
Press “ PROGRAM “ button to enter program
Menu .
Press “
Select  or 
“ button to scroll trough and
select Program Menu 06, Set temp Lock.
Press "
Program
" button to enter the menu.
2. Press the “ PROGRAM ” Button to enter program Menu
To enable setback
Press “
PROGRAM
“ button to enter program
Menu .
Press “
Select  or 
“ button to scroll trough and
select Program Menu 03.
Press “ PROGRAM “ button to enter
Program Menu 03.
Display will show set back display.
"OFF" field is blinking.
Press “ Select

or

“ button to toggle from
"OFF" to "ON".
Press "
PROGRAM " to confirm the selection.