ActronAir LC7, Руководство по эксплуатации

Страница: 25 / 40

Page 25
Operation Manual
LC7 Wall Controller
5. Press the “ PROGRAM ” Button to confirm the selection.
6. Press the “ EXIT ” Button twice to go back to Main Screen.
14.03.02. Setting Temperature Set back
NOTE
The Set back mode “Cool to” and “Heat to” limits can only be adjusted from the temperature set back menu.
In the occurance of when the unit’s setpoint (prior to Set back operation) is below the “Heat to” limit or
higher than the “Cool to” limit, the unit’s setpoint will automatically become the new Set back limit.
1. Press the “
PROGRAM
” Button to enter program Menu
To enable setback
Press “
PROGRAM
“ button to enter program
Menu .
Press “
Select  or 
“ button to scroll trough and
select Program Menu 03.
Press “ PROGRAM “ button to enter
Program Menu 03.
Display will show set back display.
"OFF" field is blinking.
Press “ Select

or

“ button to toggle from
"OFF" to "ON".
Press "
PROGRAM " to confirm the selection.
2. Press the “ SELEC T or ” Button to navigate to Program Menu 03.
To enable setback
Press “ PROGRAM “ button to enter program
Menu .
Press “ Select

or

“ button to scroll trough and
select Program Menu 03.
Press “ PROGRAM “ button to enter
Program Menu 03.
Display will show set back display.
"OFF" field is blinking.
Press “
Select  or 
“ button to toggle from
"OFF" to "ON".
Press "
PROGRAM " to confirm the selection.
3. Press the “ PROGRAM “ Button to enter Program Menu 03.
Display will show set back display “
ON
” field is blinking.
To enable setback
Press “ PROGRAM “ button to enter program
Menu .
Press “ Select  or  “ button to scroll trough and
select Program Menu 03.
Press “ PROGRAM “ button to enter
Program Menu 03.
Display will show set back display.
"OFF" field is blinking.
Press “ Select

or

“ button to toggle from
"OFF" to "ON".
Press "
PROGRAM " to confirm the selection.
4. Press the
“ PROGRAM
” Button to enter
“ ON”
Program Menu.
While the setback is "ON". Press " PROGRAM "
button to enter "ON" Program Menu
Press “ Set Temp  or  “ button to change the
"COOL" set back temperature.
Press “ PROGRAM “ button to accept "COOL" set
back temperature. Next screen will show "HEAT"
set back temperature adjustment.
Press “ Set Temp  or  “ button to change the
"HEAT" set back temperature.
(Pressing “ Set Temp

or

“ will scroll back to
"COOL" set back set point again).
Press " PROGRAM " button to accept the set back
setting.
Press “ EXIT “ button to go back to previous menu