MODEL: S002147
AFTER SALES SUPPORT
1800 465 070
7
Assembly Instructions (cont)
NOTE: Please note that some bolts are already pre-installed in the machine. In these instances, simply remove
hardware and reinstall parts where necessary.
NOTE: Please note bolts come labelled in blister packs and marked with what step they are required. This is for
easy assembly.
PREPARATION
It is strongly recommended this machine to be assembled by two or more people to avoid possible
injury.
Before you start assembly on your elliptical, please ensure you have a safe working space to build
your machine. Lay all parts out on the ground to ensure all parts are available and nothing is
missing.
Step 1
1. Using an allen key, remove bolts from cardboard tubing where front and bottom tubes are to be attached to the
main frame.
2. Place the front bottom tube (23) to the mainframe (1) with the allen bolts M8x72 (21) and arc washer (20). Then
attach the rear bottom tube (3) to the mainframe (1) with allen bolts M8x90 (4) and arc washers (58) are shown
in pictures below.
