MODEL: S002147
AFTER SALES SUPPORT
1800 465 070
22
Error Message
E1 (ERROR 1):
Normal state:
During the workout, when the monitor does not get the count signal from the gear
motor for more than 4 seconds and check under successive 3 times then the LCD will show E1.
Power on state:
The gear motor will return to zero automatically, when the signal of motor cannot
be detected for more than 4 seconds. Then the gear motor’s driver will be cut off immediately and
show the E1 on the LCD display. All the other digital and function marks are blank, and the output
signals are cut off also.
E2 (ERROR 2):
When the monitor reads the memory data, if the I.D. code is not correct or the memory is
damaged, then the monitor will show E2 immediately at power on.
E3 (ERROR 3):
After 4 seconds in start mode, if the computer detects the faulty motor did not leave the zero
point then the LCD bar displays “E3”.
