Actel ProASIC3/E Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 106

Actel ProASIC3/E Скачать руководство пользователя страница 2

Actel Corporation, Mountain View, CA 94043-4655

© 2006 Actel Corporation. All rights reserved.

Printed in the United States of America

Part Number: 50200048-2

Release: April 2009

No part of this document may be copied or reproduced in any form or by any means without prior written
consent of Actel.

Actel makes no warranties with respect to this documentation and disclaims any implied warranties of
merchantability or fitness for a particular purpose. Information in this document is subject to change
without notice. Actel assumes no responsibility for any errors that may appear in this document.

This document contains confidential proprietary information that is not to be disclosed to any
unauthorized person without prior written consent of Actel Corporation.

Trademarks

Actel and the Actel logo are registered trademarks of Actel Corporation.

Adobe and Acrobat Reader are registered trademarks of Adobe Systems, Inc.

All other products or brand names mentioned are trademarks or registered trademarks of their respective
holders.

«
1
2
3
4
...
»

Содержание ProASIC3/E











































































































Отзывы:

Нет отзывов