ACS contsys Sonicont USN020 Скачать руководство пользователя страница 5

Страница: 5 / 45

ACS-CONTROL-SYSTEM GmbH

l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]

Safety notes

Each person that is engaged with inauguration and operation of this device, must have read and

understood this technical manual and especially the safety notes.

Installation, electrical connection, inauguration and operation of the device must be made by a

qualified employee according to the informations in this technical manual and the relevant standards

and rules.

The device may only be used within the permitted operation limits that are listed in this technical

manual.

Every use besides these limits as agreed can lead to serious dangers.

The materials of the device must be chosen resp. checked for compatibility with the respective

application requirements (contacting materials, process temperature). An unsuitable material can lead

to damage, abnormal behavior or destruction of the device and to the resulting dangers.

The sensors may not be used as sole device for prevention of dangerous conditions in machines and

plants.

This measuring device meets article 3 (3) of the EC directive 97/23/EC (pressure equipment device

directive) and is designed and produced in good engineer practice.

The device meets the legal requirements of all relevant EC directives.

Using the device in a manner that does not fall within the scope of its intended use, disregarding

this instruction, using under-qualified personnel, or making unauthorized alterations releases the

manufacturer from liability for any resulting damage. This renders the manufacturer‘s warranty null

and void.

Содержание Sonicont USN020














































Результаты поиска

Содержание Sonicont USN020

Отзывы:

Похожие инструкции для Sonicont USN020

Бренды по названию

Популярные бренды

ACS contsys Sonicont USN020, Руководство пользователя

Результаты поиска

Содержание Sonicont USN020

Отзывы:

Похожие инструкции для Sonicont USN020

Бренды по названию

Популярные бренды