ACS contsys Sonicont USN020, Руководство пользователя

Страница: 20 / 45

ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de
20
Invert Signal
Inverts, dependent on the operating mode, the analogue output signal.
•
4-20 mA >> 20-4 mA
•
0-20 mA >> 20-0 mA
• 0-10 V >> 10-0 V
Default > No
Basic Setting
The symbol E at a menu item indicates its position in the extended menu structure.
This extended menu structure can be shown in the submenu display by the menu item menu
structure.
Commissioning
The commissioning function can be used to adapt the device to the constructive conditions.
Therefore the device must be operated in it’s finally installed position at the lowest possible known
filling level.
After setting the vessel type the detected measuring value must be confirmed or possibly corrected.
Afterwards the detection of the envelope curve for the error echo suppression is processed.
Error echoes causing installations, positioned below the filling level when processing the
commissioning function, cannot be detected.