ACS contsys Sonicont USN020, Руководство пользователя

Страница: 33 / 45

ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de
33
Data
The device is able to record app. one million measuring values loss-protected.
The recording is made in ring memory method, whereas after an overflow the oldest measuring values
are overwritten next.
The stored measuring values can be displayed graphically in the indicator type chart or exported as
CSV-file per Bluetooth-interface.
By the Bluetooth-interface the download resp. upload of setting, linearization or firmware files is
possible.
Bluetooth
For the Bluetooth-communication two authentication methods are available.
•
Unprotected transmission
No PIN is used
Cause the device does only receive/send files only after selection in the menu, this is the most
simple and recommended way of transmission.
If no PIN is used, each communication is uncoded, but the devices must not connected
together.
•
Protected resp. encoded transmission
A PIN is used.
If a PIN is used, the devices must be connected together for a transmission. The procedure
differs depending on the end device.
A PIN must be input and the visibility must be switched to on.
Afterwards the connection can be made at the end device.
In the end device the same PIN must be used, that is input in the device.
After the file transmission the visibility should be switched to off.
Note: For a definite identification of the devices it is recommended to use a Sensor TAG.
Send measure data
The recorded measuring values can be transmitted as a CSV-file to a Bluetooth end device.
For the selection of the measuring values that should be transmitted, the start time and the length
must be defined.
•
Start Time
For the transmission, the time of the last resp. the newest measurement, that should be
transmitted, must be defined.
The time can be alternatively set in the indicator type chart by the measuring value cursor or
the current measuring value can be used.
Default > Cursor
•
Length
For the transmission, the length of the time window, that should be transmitted, must be
defined.
The time window goes backwards to past, referring to the start time.
Default > 00d01h00m00s
•
Start Transfer
End devices with Bluetooth-ability are searched and after selection and approval the
measuring values are transmitted.