ACS contsys DAP-311, Руководство по эксплуатации

Страница: 34 / 38

ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de
34
Output
Sensor supply 24 VDC / 50 mA; 10 VDC / 50 mA
Analog output 0/4-20 mA / burden ≤ 500 Ohm, 0-10 VDC / burden ≥ 10 kOhm, 16 bit
Switching outputs
Relay with change-over contact
Switching cycles 250 VAC / 2 AAC; 30 VDC / 2 ADC
0.5 x 10
5 at contact load
0.5 x 10 6 mechanically
Division according to DIN EN 50178 /
Characteristics according to DIN EN 60255
Interface
Protocol Modbus with ASCII or RTU-protocol
RS232 9.600 Baud, no parity, 8 Databit, 1 Stopbit,
cable length max. 3 m
RS485 9.600 Baud, no parity, 8 Databit, 1 Stopbit,
cable length max. 1000 m
Power supply 100-240 VAC 50/60 Hz / DC ±10% (max. 10 VA)
10-40 VDC galv. isolated, 18-30 VAC 50/60 Hz (max. 10 VA)
Memory EEPROM
Data life ≥ 100 years / 25°C
Ambient conditions
Working temperature 0°C…50°C
Storing temperature -20°C…80°C
Wheatering resistance relative humidity 0-80% on years average without dew
EMV
EN 61326, EN 55011
CE-sign Conformity according to directive 2004/108/EG
Safety standard
According to low voltage directive 2006/95/EG
EN 61010; EN 60664-1
32
10. Technical data