ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
36
34
12. Error elimination
12. Error elimination
Error description
Measures
1.
The unit permanently indicates overflow.
• The input has a very high measurement, check the
measuring circuit.
• With a selected input with a low voltage signal, it is
only connected on one side or the input is open.
• Not all of the activated setpoints are parameterised.
Check if the relevant parameters are adjusted
correctly.
2.
The unit permanently shows underflow.
• The input has a very low measurement, check the
measuring circuit.
• With a selected input with a low voltage signal, it is
only connected on one side or the input is open.
• Not all of the activated setpoints are parameterised.
Check if the relevant parameters are adjusted
correctly.
3.
The word "
HELP
" lights up in the 7-segment
display.
• The unit has found an error in the configuration
memory. Perform a reset on the default values and
reconfigure the unit according to your application.
4.
Program numbers for parameterising of
the input are not accessible.
• Programming lock is activated
• Enter correct code
5.
"
Err1
" lights up in the 7-segment display
• Please contact the manufacturer if errors of this
kind occur.
6.
The device does not react as expected.
• When you are not sure, if the device has been para-
meterised before, then follow the steps as written in
chapter 6
and set it back to its delivery status.
update: 31.03.2015
M3_31GB.pdf
