the partitions layout, nor the
Next
button will be enabled until you enter the correct
password.
4. Click
Next
.
5. If you selected an archive containing incremental images, Acronis True Image Home will
suggest that you select one of the successive incremental images by its creation date/time.
Thus, you can explore the partition state to a certain moment.
To mount an incremental image, you must have all previous incremental images and the
initial full image. If any of the successive images are missing, mounting is not possible.
To mount a differential image, you must have the initial full image as well.
6. Click
Next
.
7. Select a partition to mount as a virtual disk. (Note that you cannot mount the entire disk.)
You can also select a letter to be assigned to the virtual disk from the
Drive letter
drop-
down list. If you do not want to assign a letter to the virtual drive, select
Do not assign
.
8. Click
Next
.
9. Select whether you want to mount image in
Read-only
or
Read/Write
mode.
10. Click
Next
.
11. If you select
Read/Write
mode, the program assumes that the connected image will be
modified, and creates an incremental archive file to capture the changes. It is strongly
recommended that you list the forthcoming changes in the comment to this file.
12. The program displays a summary containing a single operation. Click
Proceed
to
connect the selected partition image as a virtual disk.
13. After the image is connected, the program will run Windows Explorer, showing its
contents. Now you can operate with files or folders as if they were located on a real disk.
You can connect multiple partition images. If you want to connect another partition image,
repeat the procedure.
56 Copyright © Acronis, Inc., 2000-2006
