224
Copyright © Acronis, Inc., 2000-2010
If the archive is stored on an FTP or SFTP server, type the server name or address in the Path
field as follows:
ftp://ftp_server:port _number or sftp://sftp_server:port number
If the port number is not specified, port 21 is used for FTP and port 22 is used for SFTP.
After entering access credentials, the folders on the server become available. Click the
appropriate folder on the server.
You can access the server as an anonymous user if the server enables such access. To do so,
click Use anonymous access instead of entering credentials.
According to the original FTP specification, credentials required for access to FTP servers are transferred
through a network as plaintext. This means that the user name and password can be intercepted by an
eavesdropper using a packet sniffer.
If the archive is stored on a locally attached tape device, expand the Tape drives group, then
click the required device.
2.
In the table to the right of the tree, select the archive. The table displays the names of the
archives contained in each vault/folder you select.
While you are reviewing the location content, archives can be added, deleted or modified by
another user or by the program itself according to scheduled operations. Use the
Refresh
button
to refresh the list of archives.
3.
Click
OK
.
6.5.2
Backup selection
To select a backup:
1.
Select one of the backups by its creation date/time.
2.
To assist you with choosing the right backup, the bottom table displays the volumes contained in
the selected backup.
To obtain information on a volume, right-click it and then click
Information
.
3.
Click
OK
.
6.5.3
Access credentials
To specify credentials
1.
Select one of the following:
Use the current user credentials
The program will access the location using the credentials of the current user.
Use the following credentials
The program will access the location using the credentials you specify. Use this option if the
current user account does not have access permissions to the location. You might need to
provide special credentials for a network share or a storage node vault.
Specify:
User name
. When entering the name of an Active Directory user account, be sure to also
specify the domain name (DOMAIN\Username or Username@domain)
Password
. The password for the account.
2.
Click
OK
.
According to the original FTP specification, credentials required for access to FTP servers are transferred
through a network as plaintext. This means that the user name and password can be intercepted by an
eavesdropper using a packet sniffer.
