SERIES AP445 ACROPACK
USER
’S MANUAL
Acromag, Inc. Tel: 248-295-0310
- 4 - http://www.acromag.com
- 4 -
www.acromag.com
1.0
GENERAL INFORMATION
1.1 Intended Audience
This user’s manual was written for technically qualified personnel who will
be working with I/O devices using the AcroPack module. It is not intended
for a general, non-technical audience that is unfamiliar with I/O devices and
their application.
1.2 Preface
The information contained in this manual is subject to change without
notice, and Acromag, Inc. (Acromag) does not guarantee its accuracy.
Acromag makes no warranty of any kind with regard to this material,
including, but not limited to, the implied warranties of merchantability and
fitness for a particular purpose. Further, Acromag assumes no responsibility
for any errors that may appear in this manual and makes no commitment to
update, or keep current, the information contained in this manual. No part
of this manual may be copied or reproduced in any form, without the prior
written consent of Acromag,
1.2.1 Trademark, Trade Name and Copyright Information
© 2016 by Acromag Incorporated.
All rights reserved. Acromag and Xembedded are registered trademarks of
Acromag Incorporated. All other trademarks, registered trademarks, trade
names, and service marks are the property of their respective owners.
1.2.2 Class A Product Warning
This is a Class A product. In a domestic environment this product may cause
radio interference, in which case the user may find it necessary to take
adequate corrective measures.
1.2.3 Environmental Protection Statement
This product has been manufactured to satisfy environmental protection
requirements where possible. Many components used (structural parts,
circuit boards, connectors, etc.) are capable of being recycled. Final
disposition of this product after its service life must be conducted in
accordance with applicable country, state, or local laws or regulations.
1.3 AcroPack Information – All Models
The AcroPack IO modules are based on the PCI Express Mini Card
Electromechanical specification and are 70mm in length with an added 100
pin field I/O connector.
