DC Inverter
X-Series
for R410A Unitary Split Air Conditioner
19
2) Use a screwdriver to unscrew the terminal screw on the terminal board.
3) Use a round terminal fastener or clamp to fix the round terminal firmly on
the peeled wire end.
4) Locate the round terminal conduit. Use a screwdriver to replace it and
tighten up the terminal screw (as shown below).
Unit: mm(inch)
(3) How to connect the the thermostat wires and power cords.
Lead the thermostat wires and power cords through the insulation tube. (as shown
in the following figure).
①
. Before working, please check whether the units are powered on.
②
. Wrong wire connection may burn the electrical components.
③
. Connect the wires firmly to the wiring box. Incomplete installation may lead to fire
hazard.
④
. Ground wire should be connected.