Acer Altos R920 Series, Инструкция по установке и настройке

Страница: 39 / 57

31 Altos R920
Installation Configuration Guide
Onboard Chipset N/A Built-in
Integrated SAS
hardware RAID
00.00.03.09
EasyBUILD 8.0 build 100 (or
later)
Onboard Gigabit
Ethernet
7.6.9
EasyBUILD 8.0 build 100 (or
later)
Add-on Gigabit
Ethernet on I/O
expansion
module
1.0.8
EasyBUILD 8.0 build 100 (or
later)
Trusted
Platform Module
No driver N/A
IOAT 2.15
EasyBUILD 8.0 build 200 (or
later)
SAS Hot-swap
backplane
N/A Built-in
Software Required
The management utility for integrated SAS hardware RAID can be
found in the EasyBUILD 8.0 build 100 (or later).
Software Version EasyBUILD Version
RAID Web
Console 2
2.19-01
EasyBUILD 8.0 build 100 (or
later)
Configuring integrated SAS hardware RAID
Please refer to the Appendix A. for the integrated SAS
hardware RAID configuration.
Installation Tips
NOTE. There is no built-in driver for Integrated SAS hardware
RAID in the Red Hat Enterprise Linux 5.0. You need an external
USB floppy drive for applying driver during the OS
installation.
1.
Since Red Hat Enterprise Linux 5.0 cannot recognize the
integrated SAS hardware RAID, you need to make a driver
diskette from the EasyBUILD 8.0 build 100 first before
the installation.
2.
Type linux dd when the prompt boot: appears at the start.
3.
Please select the sda as the Driver Disk Source .
4.
Follow the instruction to load the integrated SAS
hardware RAID driver from the driver diskette.
5.
At the package selection step, select Software
Development for the installation package.
6.
Please follow the normal procedure to finish the