Acer Altos R920 Series, Инструкция по установке и настройке

Страница: 16 / 57

Altos R920 Installation Configuration Guide 8
Windows Server 2008 Enterprise x64 Edition (with
Integrated SAS Hardware RAID)
Below information describes how to manually install Windows
Server 2008 Enterprise x64 Edition on Altos R920 with
integrated SAS hardware RAID.
BIOS Required
Altos R920 BIOS 23 (or later), BMC 17 (or later) and FRUSDR 14
(or later) are required to support Windows Server 2008.
Drivers Required
For Windows Server 2008 x64 Installation, the following device
drivers are required.
Device Version EasyBUILD Version
Onboard VGA
8.240.50.30
00
EasyBUILD 8.0 build 200 (or
later)
Onboard Chipset 8.6.1.1001
EasyBUILD 8.0 build 200 (or
later)
Integrated SAS
hardware RAID
2.20.0.64
EasyBUILD 8.0 build 200 (or
later)
Onboard Gigabit
Ethernet
9.12.17.0
EasyBUILD 8.0 build 200 (or
later)
Add-on Gigabit
Ethernet on I/O
expansion
module
10.2.28.0
EasyBUILD 8.0 build 200 (or
later)
Trusted
Platform Module
N/A OS built-in
IOAT 1.2.79.9
EasyBUILD 8.0 build 200 (or
later)
SAS Hot-swap
backplane
N/A OS built-in
Software Required
The management utility for integrated SAS hardware RAID and
NIC can be found in the EasyBUILD 8.0 build 200 (or later).
Software Version EasyBUILD Version
RAID Web
Console 2
2.34
EasyBUILD 8.0 build 200 (or
later)
PROSet Utility 13.0.44.0
EasyBUILD 8.0 build 200 (or
later)
Configuring Integrated SAS Hardware RAID
Please refer to the Appendix A. for the integrated SAS
hardware RAID configuration.