Acer Altos R920 Series, Инструкция по установке и настройке

Страница: 30 / 57

Altos R920 Installation Configuration Guide 22
RAID in the OS. You need an USB floppy for applying driver
during the OS installation.
1.
As Windows Server 2003 R2 can’t recognize the integrated
SAS hardware RAID, you need to make a driver diskette
from the EasyBUILD 8.0 build 100 first before the
installation.
2.
Press F6 at the start of installation to provide the
driver disk for the integrated SAS hardware RAID.
3.
Select “ Intel SAS RAID Controller Driver (Server 2003 32-
bit) ” as target driver.
4.
After loading the RAID driver from diskette, follow the
normal procedure to finish the installation.
Chipset Driver Installation
1.
After the installation completes, you would see the
following devices with yellow mark in Device Manager.
2.
Please insert the EasyBUILD 8.0 build 100 into the
optical drive
3.
Expand Drivers -> Altos R920 -> Chipset , select Windows
Server 2003 and click on Setup .
4.
Follow the instruction to install the driver and reboot
the server after the chipset driver is installed.