Acer Altos R920 Series, Инструкция по установке и настройке

Страница: 19 / 57

11 Altos R920
Installation Configuration Guide
2.
Expand Utilities -> Altos R920 -> Integrated SAS hardware
RAID , select RAID Web Console 2 (Windows) and click on
Setup.
3.
Follow the instruction and use the default setting to
complete the RAID Utility Installation.
Network Utility Installation
The PROSet utility for the onboard Gigabit Ethernet
controller will be installed automatically when you
installing the onboard Gigabit Ethernet driver.
Windows Server 2008 Enterprise Edition (with Integrated
SAS Hardware RAID)
Below information describes how to manually install Windows
Server 2008 Enterprise Edition on Altos R920 with integrated
SAS hardware RAID.
BIOS Required
Altos R920 BIOS 23 (or later), BMC 17 (or later) and FRUSDR 14
(or later) are required to support Windows Server 2008.
Drivers Required
For Windows Server 2008 Installation, the following device
drivers are required.
Device Version EasyBUILD Version
Onboard VGA
8.240.50.30
00
EasyBUILD 8.0 build 200 (or
later)
Onboard Chipset 8.6.1.1001
EasyBUILD 8.0 build 200 (or
later)
Integrated SAS
hardware RAID
2.20.0.32
EasyBUILD 8.0 build 200 (or
later)
Onboard Gigabit
Ethernet
9.12.17.0
EasyBUILD 8.0 build 200 (or
later)
Add-on Gigabit
Ethernet on I/O
expansion
module
10.2.28.0
EasyBUILD 8.0 build 200 (or
later)
Trusted
Platform Module
N/A OS built-in
IOAT 1.2.79.9
EasyBUILD 8.0 build 200 (or
later)
SAS Hot-swap
backplane
N/A OS built-in