Acer Altos R920 Series, Инструкция по установке и настройке

Страница: 35 / 57

27 Altos R920
Installation Configuration Guide
Drivers Required
For Red Hat Enterprise Linux 5.0 EM64T Installation, the
following device drivers are required.
Device Version EasyBUILD Version
Onboard VGA N/A Built-in
Onboard Chipset N/A Built-in
Integrated SAS
hardware RAID
00.00.03.09
EasyBUILD 8.0 build 100 (or
later)
Onboard Gigabit
Ethernet
7.6.9
EasyBUILD 8.0 build 100 (or
later)
Add-on Gigabit
Ethernet on I/O
expansion
module
1.0.8
EasyBUILD 8.0 build 100 (or
later)
Trusted
Platform Module
No driver N/A
IOAT 2.15
EasyBUILD 8.0 build 200 (or
later)
SAS Hot-swap
backplane
N/A Built-in
Software Required
The management utility for integrated SAS hardware RAID can be
found in the EasyBUILD 8.0 build 100 (or later).
Software Version EasyBUILD Version
RAID Web
Console 2
2.19-01
EasyBUILD 8.0 build 100 (or
later)
Configuring integrated SAS hardware RAID
Please refer to the Appendix A. for the integrated SAS
hardware RAID configuration.
Installation Tips
NOTE. There is no built-in driver for Integrated SAS hardware
RAID in the Red Hat Enterprise Linux 5.0 EM64T. You need an
external USB floppy drive for applying driver during the OS
installation.
1.
Since Red Hat Enterprise Linux 5.0 EM64T cannot recognize
the integrated SAS hardware RAID, you need to make a
driver diskette from the EasyBUILD 8.0 build 100 first
before the installation.
2.
Type linux dd when the prompt boot: appears at the start.
3.
Please select the sda as the Driver Disk Source .