Acer Altos R920 Series, Инструкция по установке и настройке

Страница: 33 / 57

25 Altos R920
Installation Configuration Guide
7.
Click on Next and follow the instruction to finish the
driver update.
8.
After installing the driver, you would see
STMicroelectronics Trusted Platform Module listed in
System devices.
VGA Driver Installation
1.
Windows will treat onboard VGA as Standard VGA device.
You can find the ATI ES1000 driver in EasyBUILD 8.0 build
100. Please insert the EasyBUILD 8.0 build 100 into the
optical drive.
2.
Expand Drivers -> Altos R920 -> Graphics adapters -> ATI
ES1000 , select Windows Server 2003 and click on Setup .
3.
Follow the instruction to install the VGA driver and
reboot the server after the driver is installed.
4.
After installing the driver, you would see ATI ES1000
listed in Display adapters.
Gigabit Ethernet Driver Installation (I/O Expansion Module)
If the optional I/O Expansion module is installed on Altos
R920, there are two additional Intel 82575EB Gigabit Ethernet
available on Altos R920.
1.
For the two more Ethernet Controller listed under Other
device in Windows Device Manager, it should be the Intel
82575EB Gigabit Ethernet controller on the I/O Expansion
module. You could find the driver in EasyBUILD 8.0 build
100. Please do the same on both of the devices.
2.
Right-click on the Ethernet Controller and select Update
Driver .
3.
Select No, not this time . Do not connect to Windows
Update to search the driver.
4.
Select Install from a list or specific location
(Advanced) .
5.
Select Search the best driver these locations and check
Include this location in the search .
6.
Click on Browse and specify the path for the driver.
Please refer to the EasyBUILD Version 8.0 build 100 for
NIC driver in Driver required section.
7.
Click on Next and follow the instruction to finish the
driver update.