Acer Altos R920 Series, Инструкция по установке и настройке

Страница: 15 / 57

7 Altos R920
Installation Configuration Guide
Below is Altos R920 OS certification matrix:
Operating System
Servic
e Pack
Status Note
Windows Server 2008 Enterprise
Edition
n/a
Certifie
d
1, 2,
3
Windows Server 2008 Enterprise
x64 Edition
n/a
Certifie
d
1, 2,
3
Windows Server 2003 R2
Enterprise Edition
SP2
Certifie
d
Windows Server 2003 R2
Enterprise x64 Edition
SP2
Certifie
d
Red Hat Enterprise Linux 5.0
N/A
Certifie
d
Red Hat Enterprise Linux 5.0
EM64T
N/A
Certifie
d
SuSE Linux Enterprise Server 10 SP1
Certifie
d
SuSE Linux Enterprise Server 10
EM64T
SP1
Certifie
d
NOTE1. Altos R920 BIOS 23 (or later), BMC 17 (or later) and
FRUSDR 14 (or later) are required to support Windows Server
2008.
NOTE2. This Windows Server 2008 certification also applies to
Standard Edition and Web Server 2008.
NOTE3. EasyBUILD 8.0 build 200 (or later) can support Windows
Server 2008.
The drivers required for the OS installation can be found on
the EasyBUILD 8.0 build 100. We suggest that you use the
drivers contained in the EasyBUILD 8.0 build 100, as these
drivers are tested and qualified by Acer.
There are two ways you can get the drivers. You can either
make diskettes from Resource CD, or put the Resource CD in the
CD-ROM drive and search the driver directly from the Resource
CD.
NOTE. In this section, we assume the OS is installed on the
HDD connected to the integrated SAS hardware RAID.
NOTE. You need an USB floppy for applying driver during OS
installation if there is no built-in driver for disk
controller driver in the OS.
OS INSTALLATION TIPS