manualshive.com logo in svg

Acer Altos G540 M2 Series, Руководство пользователя

Поделиться
Скачать
Acer Altos G540 M2 Series Скачать руководство пользователя страница 102

 3 System upgrade

92

Installing a redundant power supply module  

The Altos G540 M2 supports two 610-watts hot-swap power supply 
modules. The system ships out with only one power supply module 
installed. You have the option to install a second module to provide 
the system with a redundant power source. A redundant power 
configuration enables a fully-configured system to continue running 
even if one of the power supply module fails.

WARNING!  

To reduce the risk of personal injury or 

damage to the equipment, the installation of power 
supply modules should be referred to individuals who are 
qualified to service server systems and are trained to deal 
with equipment capable of generating hazardous energy 
levels. 

WARNING! 

To reduce the risk of personal injury from 

hot surfaces, observe the thermal labels on each power 
supply modules. You can also consider wearing protective 
gloves.

WARNING!  

To reduce the risk of personal injury from 

electric shock hazards, do not open the power supply 
module.  There are no serviceable parts inside the 
module.

Caution!  

Electrostatic discharge can damage electronic 

components.  Make sure that you are properly grounded 
before handling a power supply module.

Содержание Altos G540 M2 Series






























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды