manualshive.com logo in svg

Acer Altos 9100 Series, Руководство пользователя

Поделиться
Скачать
Acer Altos 9100 Series Скачать руководство пользователя страница 5

v

12.  Do not attempt to service this product yourself, as opening or removing covers

may expose you to dangerous voltage points or other risks.  Refer all servicing
to qualified service personnel.

13. Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a.  When the power cord or plug is damaged or frayed

b.  If liquid has been spilled into the product

c.  If the product has been exposed to rain or water

d.  If the product does not operate normally when the operating instructions

are followed.  Adjust only those controls that are covered by the operating
instructions since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.

e.  If the product has been dropped or the cabinet has been damaged

f.  If the product exhibits a distinct change in performance, indicating a need

for service

14. Use only the proper type of power supply cord (provided in your

keyboard/manual accessories box) for this unit.  It should be a detachable
type: UL listed/CSA certified, type SVT/SJT, rated 8A 125V minimum.
Maximum length is 15 feet (4.6 meters).

Содержание Altos 9100 Series



































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды