AXS
–
FL Step Manual
AXS
–
STEP Manual vers 3.0
17
Place the gear arms at the step
assembly over the two M8 bolts. Align
the gear arms with the two marks at the
gear.
Place the motor assembly over the gear
arms.
Make sure the lip slides in the slot from
the Aluminium profile.
Place the
two large washer’s and tight up
the first nut than check if the arm gear
can turn freely without too much friction.
If the arm is too tight, remove the nut and washer
and place a 0, 2 mm shim ring at the distance
bushing. Tight up again and check again. Repeat
this until the arm has the proper freedom of
movement.
Than tight up the second nut and check if the
motor base plate can move free in the slot. If
the motor base plate can’t be moved free by
hand in the slot than you need to add an extra
shim ring or more if needed.
