AccuEnergy AcuRev 1312, Руководство пользователя

Страница: 24 / 48

www.accuenergy.com
V: 1.0 Revised: Aug. 2017
Chapter 3: Operation
23
3.2 Display Mode and Key Operations
The LCD display of the AcuRev 1312 meter consists of three modes of display; Important pa-
rameter display, all parameters display and settings mode. By default, the important parameter
display shows the Consumed Active Energy(kWh) parameter.
Important parameter display:
The important parameter display is the default display mode of the meter, it will display the
measurement parameters of the AcuRev 1312. Users will only see the Consumed Active Ener-
gy(kWh) parameter unless additional parameters are added through settings mode.
Users will be in this mode when they power on the meter or when they push the “SCROLL” key
after a period of inactivity. Each measurement parameter in this mode will display on the screen
for 6 seconds. When the “SCROLL” key is pressed in this display mode it will lock the current
page for a minute and the backlight will remain on. Pressing the “SCROLL” key again will turn to
the next page and lock the display for another minute. After, one minute of inactivity the display
will continue operating normally by cycling through the enabled measurement parameters.
For adding additional parameters to the Important Parameter display, please refer to the
AcuRev 1310 series user manual.
All parameter display:
The all parameter display will display all the parameters the meter supports as well as informa-
tion about the AcuRev 1312 meter. Pressing and holding the “SCROLL” key from the important
parameter display mode will direct the user to the all parameter display mode. In this mode
there will be a displayed in the bottom row of the display to indicate the AcuRev 1312 is in all
parameter display mode.
Pressing the “SCROLL” key will turn to the next page in the display. Once the user has cycled
through all the parameters pressing the “SCROLL” key again will take the user back to the first
page.
Table 3.2-All parameter display
Page Parameter
1 Voltage Wiring Check
2 Current Wiring Check
3 Device Address
4 Baud Rate
5 Parity
6 Hardware Version
7 Software Version