Access Security Products KP-KR16, Руководство пользователя

Страница: 8 / 13

8
KP-KR
16
Detailed Programming Guide
User Settings
To enter the programming
mode * Master code #
888888 is the default factory master code
To exit from the programming
mode *
Note that to undertake the following programming, the master user must be logged in
To change the master code 0 New code # Repeat new code #
The master code could be any 6 digits number
Setting the working mode:
Set valid Card or PIN users
Set valid Card and PIN users
3 1 2 # , Zone 1
3 2 2 # , Zone 2
Entry is by either Card or PIN ( Factory default setting )
3 1 1 # , Zone 1
3 2 1 # , Zone 2
Entry is by Card and PIN together
Note:
When adding users, if the Card or Pin user has been enrolled already, you can not add it again. The R3K
will give a bleep as error
Factory default setting: Card or PIN mode
To set users for Zone 1. ( 3 1 2 # )
To add PIN users
1 User ID number # PIN #
The ID number is any number among 1 - 1100
The PIN is any 4-8 digits between 0000 - 99999999 with the exception
of 1234 which is reserved. Users can be added continuously without
exiting programming mode as follows:
1 User ID no 1 # PIN # User ID no 2 # PIN #
To delete PIN users 2 User ID number #
Users can be deleted continuously without exiting programming mode
To change the PIN of a PIN
user
(Note: This step must be
done out of programming
mode)
* ID number # Old PIN # New PIN # Repeat new PIN #
ACCESS
SECURITY
PRODUCTS
LTD