7
Remarks:
the Zone 2, it can be used to operate a doorbell if there is no need to operate a second door. The
wiring to connect the doorbell is via NO2 and COM2. Press
#
, the
KP-KR16
will send out a switching signal to
the doorbell, as long as you press the”
#
”, the doorbell will operate, it will stop when you release the ”
#
”
Relay operation (Pulse mode and Toggle mode)
Both of the two relays can operate in Pulse Mode (suitable for access control) or Toggle Mode (suitable for
arming/disarming alarms, switching lights, machines….etc)
Every time a valid fob/card or Pin is read/input in Pulse Mode, the relay will operate for the pre-set relay pulse
time
Every time a valid fob/card or Pin is read/input in Toggle Mode, the relay changes state and will not turn back
until the fob/card is presented or the PIN used
Anti-Tamper Alarm
The
KP-KR16
uses an LDR (light dependent resistor) as an anti tamper alarm. If the keypad is removed
from the cover then the tamper alarm will operate
Sound and LED indication
Operation Status
Red LED
Green LED
Blue LED
Buzzer
Zone 1, unlock
-
Bright
-
Short Ring
Zone 2, unlock
-
-
Bright
Short Ring
Power on
Bright
-
Long Ring
Stand by
Shines slowly
Off
-
-
Press keypad
-
-
-
Short Ring
Operation successful
-
Bright
-
Long Ring
Operation failed
-
-
-
3 Short Rings
Enter into programming mode
Bright
off
-
Long Ring
In the programming mode
Bright
Bright
-
-
Exit from the programming mode
Shines slowly
-
-
Long Ring
Alarm
Shines quickly -
-
Alarm
ACCESS
SECURITY
PRODUCTS
LTD
