10
To add
Card
Users. (Method
1)
Auto-generated ID numbers
5 Read Card #
Card can be added continuously without exiting programming mode
Card and PIN Mode
To set users for Zone 1. ( 3
1
1
# )
To Add a
card
and
Pin
user
(The PIN is any four digits
between 0000 & 99999999
with the exception of 1234
which is reserved.)
Add the card as for a card user
Press
*
to exit from the programming mode
Then allocate the card a PIN as follows:
* Read card 1234 # PIN # PIN #
To change a
PIN
in card and
PIN mode (Method 1) Note
that this is done outside
programming mode so the
user can undertake this
themselves
* Read Card Old PIN # New PIN # New PIN #
To change a
PIN
in card and
PIN mode (Method 2) Note
that this is done outside
programming mode so the
user can undertake this
themselves
* ID number # Old PIN # New PIN # New PIN #
To delete a
Card and
PIN
user just delete the card
2 Read Card # or 2 User ID #
To set users for Zone 2. ( 3
1
2
# )
The operation is the same as Zone 1.
To set
Card
user only.(in this mode, users can only be valid by card)
To set
Card
user only
3 1 0 # , Zone 1
3 2 0 # , Zone 2
Entry is by
Card only
ACCESS
SECURITY
PRODUCTS
LTD
