11
To delete
ALL
users
Note:
This is a
dangerous
option, so use with care
Delete all users of Zone 1: 2 0000 #
Delete all users of Zone 2: 9 0000 #
To unlock the door (or change relay state)
For a
PIN
user
Enter the PIN then press #
For a
card
User
Read card
For a
card and PIN
user
Read card
then enter
PIN #
Relay Setting (Pulse mode, Toggle mode)
Pulse mode
(Factory default)
Pulse mode - Door relay time
setting
For Zone 1: 4 1 1-99 #
For Zone 2: 4 2 1-99 #
The door relay time is between 1~99 seconds, the factory default
setting is 5 seconds. 1 means Zone 1. 2 means Zone 2
Toggle mode
Toggle mode
For Zone 1: 4 1 0 #
For Zone 2: 4 2 0 #
Door, Alarm, Acoustic Signal,
Door Bell Settings
Door Open Detection
Door Open Too Long
(DOTL) warning
. When used with an optional magnetic contact or built-in
magnetic contact of the lock, if the door is opened normally, but not closed after 1 minute, the inside
buzzer will bleep automatically to remind people to close the door and continue for 1 minute before
switching off automatically
Door Forced Open warning.
When used with an optional magnetic contact or built-in magnetic
contact of the lock, if the door is forced open, or if the door is opened after 20 seconds of the
electro-mechanical lock not closed properly, the inside buzzer and alarm output will both operate
To disable door open
detection. (Factory default
setting)
6 0 #
To enable door open detection For Zone 1: 6 1 #
For Zone 2: 6 2 #
You can enable the door open detection of only one Zone
ACCESS
SECURITY
PRODUCTS
LTD
