5: Monitoring and filtering
Traffic policies and monitoring
74
Traffic policies and monitoring
To view a list of all traffic policies and their settings, open the
Traffic > Policies
page.
This page shows the access policy rules that are enabled for a specific port. For example, if
the Network port is selected then this is the list of policy rules that are enabled or disabled for
the Network port.
Access policy rules are ordered by their priority. When rules are applied they are processed
from the top down and the first suitable rule that is found is applied.
Note:
The *default filter is a factory default rule that forwards all traffic. A rule, such as this is
required to have traffic forwarded.
Note:
The following information is presented for each policy:
•
Entry:
Indicates the position of the rule in the access list.
•
State:
Indicates if the policy is enabled or disabled. Disabled policies are skipped when
the rules are applied to incoming data.
•
Action:
Indicates the action that the policy applies to data that it matches.
•
Filter name:
Indicates the name of the filter assigned to the policy.
•
Packets good:
The number of good packets that matched the policy. A good packet is an
error-free frame that has a length between 64 bytes and the maximum frame length.
•
Bytes good:
This is the total number of bytes in good packets that matched the policy.
•
Packets bad:
The number of bad packets that matched the policy. A bad packet is a
packet that has a valid framing but contains an error within the packet, has a bad CRC or
either shorter than 64 bytes or longer than the maximum frame length.
Содержание EtherNID GE
Страница 1: ...1 EtherNID Administrator s Guide for the EtherNID EE EtherNID GE MetroNID TE MetroNID TE R...
Страница 112: ...7 Operations Administration and Maintenance OAM statistics 112...
Страница 145: ...10 Traffic shaper Traffic shaper statistics 145...
Страница 162: ...13 Appendix A Alarms Alarms 162...
