Accedian EtherNID GE, Руководство администратора

Страница: 43 / 166

3: Management and configuration Management bridge
43
Management bridge
This section describes how to set up a bridged management port using the command line
interface.
A minimum of two EtherNIDs are required for this setup. An out-of-band EtherNID
management port will be used to manage the other EtherNIDs, in-band through a bridged
interface. This is useful when the core transport devices do not need to be connected to the
internal private management network. Instead, the first EtherNID is connected to the private
network and manages the other EtherNIDs in-band through its out-of-band Management port.
The following diagram describes the typical setup scenario for a bridged interface:
Configuration
procedure
1. Power on EtherNID #1 with factory default settings.
2. Connect your computer to serial port on the back of the EtherNID.
3. Open a terminal emulation session with the following configuration:
• Bits per second: 115200
• Data bits: 8
• Parity: None Stop bits: 1
• Flow Control: None
4. Login to the CLI with username admin and password admin .
5. If an EtherNID GE is being used, and the setup requires the Client and Network ports to
be set as copper medium, type the following command:
media-selection select RJ45-A_RJ45-B