Accedian EtherNID GE, Руководство администратора

Страница: 33 / 166

3: Management and configuration SNMP settings
33
SNMP
parameters
Enable agent
Select this checkbox to enable the SNMP agent.
SNMP system name
Specify a name to identify the EtherNID. By convention, this is the node's fully-qualified
domain name.
Contact information
Specify contact information for the EtherNID. Generally an email address.
System location
Identify the physical location of the EtherNID.
Agent UDP port
Specify the UDP port the SNMP agent uses for all IPv4 interfaces.
Read-only community
Specify the community string to control read-only access to the EtherNID.
Read-write community
Specify the community string to control read/write access to the EtherNID.
Enable trap host
Enable these options to have the unit send SNMPv1 or SNMPv2c traps to the specified
management host(s) .
Community string
Specify the community string required to send traps to the management host(s) .
Management host
Specify the IP address or host name of the device that will receive SNMP traps (and/or inform
notifications). The EtherNID sends a Cold Start trap when it starts up.
UDP port
Specify the UDP port that the EtherNID will use to send traps to the management host(s). By
default, the well-known SNMP trap port (162) is used.
Note: For a list of Public and Private supported MIBs, see Appendix B.