15 Teaching the wireless components
72
Once you have switched the wireless socket to the training mode and made
the required configurations on the web server, switch to the output in which
you want to teach the socket or sockets via the web server. To do this, press
the wireless output button on the overview screen.
The socket gives an acoustic feedback on the success of the training process.
Multiple sockets can be trained to one output.
When you are finished, press
ESC/DEL
once. Pressing any other buttons has
no effect on the alarm centre at this point. The fifth LED lights up again
permanently. The main menu is accessed again.
To exit programming mode, press
ESC/DEL
until the alarm centre starts to
beep (about once per second). Close the housing or press and hold down the
cover tamper contact (SW4
(B)
, underneath ESC/DEL) for about 4 seconds
until it beeps twice. The data is saved in an EEPROM.
