5 Important safety information
4
Warning
All guarantee claims become invalid for damage caused by non-
compliance with these operating instructions.
We cannot be held liable for resulting damages.
Warning
We cannot be held liable in the event of material or personal damage
caused by improper operation or non-compliance with the safety
information.
All guarantee claims are invalid in such cases.
Keep this manual in a safe place for future reference.
If you pass on or sell the device, you must also include this user manual. This device
has been manufactured in accordance with international safety standards. Inspect
the device before putting it into operation. If the device shows signs of damage, do
not put it into operation.
5.3 Power
supply
•
Only operate this device through a power source which supplies the mains power
specified on the type plate of the power supply unit.
•
If you are unsure of the power supply at the installation location, contact your
power supply company.
•
Only operate this device with the device-specific power supply unit.
•
This device uses Safety Extra Low Voltage (SELV). The circuits of the switch
outputs and the 13.8 V power supply also fall into this voltage range. SELV is a
low electrical current that offers special protection against electric shocks based
on its low level and insulation compared to higher voltage circuits.
Warning
The installation of additional equipment or modification of the device
invalidates your guarantee if not carried out by trained personnel.
Your guarantee is invalidated in the event of improper installation of
additional equipment or modifications.
5.4 Overloading/overvoltage
•
Avoid overloading of mains sockets, extension cables and adapters as this can
result in fires or electric shocks.
•
Use overvoltage protection to prevent damage caused by overvoltage (e.g.
electrical storms).
